Du Pont WFHD13001 Serie Manual De Instrucciones página 4

STEP 2
Configure Your System
See the System Configuration Chart below to determine how you will configure your filter system and to identify the additional parts and
tools you will need for installation.
Materials Needed for 1" Diameter Housing Inlet/Outlet Ports
3/4"
COPPER
QUANTITY
PIPE
1" M.I.P x 3/4" F.I.P. Reducer
Bushing
3/4" O.D. Tube x 3/4" M.I.P
2 Compression Male Adapter
or
3/4" MPT x 3/4" CTS QC
Adapter (WATTS WaterPEX)
TOOLS
Pipe Cutter or Hacksaw
2 Adjustable Wrenches
Tape Measure
SUPPLIES
Plumber's Tape
NOTE: For galvanized piping, consult a professional plumber.
WFHD13001
1" 3/4"
COPPER PVC
PIPE PIPE
1" O.D. Tube x 1" M.I.P
Compression Male Adapter 1" NPT x 3/4" Tube
or Male Adapter
1" MPT x 1" CTS QC PVC Slip Type
Adapter (WATTS WaterPEX)
Pipe Cutter or Hacksaw Pipe Cutter or Hacksaw
2 Adjustable Wrenches 2 Adjustable Wrenches
Tape Measure Tape Measure
Plumber's Tape
Plumber's Tape PVC Cleaner
PVC Adhesive
2
1"
PVC
PIPE
1" NPT x 1" Tube
Male Adapter
PVC Slip Type
Pipe Cutter or Hacksaw
2 Adjustable Wrenches
Tape Measure
Plumber's Tape
PVC Cleaner
PVC Adhesive
NOTE: Valves shown in diagrams are not included but can be
purchased at a local hardware store.
4
During filter cartridge remplacement it is
necessary to shut off the water supply and purge
the water lines. Adding shut-off valves will isolate
the system from the supply line and household
water. In this way, filter cartridge replacement is
faster with less mess and hassle.
VALVE
GOOD
VALVE
BETTER
VALVE
BEST
V4.1E