Aquavitro element Z Manual De Instrucciones página 10

Assembly
Figure 2
After checking the integrity of each component, assemble the unit using the diagram. (Figure 2)
1. Start by removing the Locking Rings (B1 and B2) from the Support Base (A).
2. Place the main Reactor Column (E) with its internal components having been pre-packaged with
it, on the Support Base (A).
3. Apply the Locking Ring (B1) around the connection point of the Reactor Column (E) to the Support
Base (A).
4. Apply the Locking Ring (B2) around the Reactor Column (E) and the Reactor Column Cover (H).
10