Chapter Ten Common Faults And Solutions - SATA AE5603 Manual Del Uso

Chapter Ten Common Fault and solution.
Fault
1.Indicators on computer a. Not connecting power.
and display don't work b. Not switching on.
c. Cable broken.
2.Display does't work a.Display switch off.
b.Cable connecting computer and display has problem.
c.Display broken.
3.Not be able to print or a.Printer no switch on.
print bad b.No paper in the printer.
c.Printer not installed well.
d.Not Ink in printer.
4.Computer can not find a.Camera not installed well.
any camera. b. Cable connecting computer and camera has problem.
c. Camera doesn't work
5.Indicator can flash a.No connecting 12V power.
board doesn't b.Wire connecting flash board and power has problem.
c.12V power broken.
d.Transmitting tub broken.
6.Camera can not capture a.Dirt on target plate.
any target plate. b.Obstacle between camera and target plate.
c.Camera doesn't work.
d.Flash board doesn't work.
7.Camera work well and No click button "remeasuring"
find target plate,but
pushing arrow doesn't
appear.
8. When pushing vehicle, No calibration file in C:\wheel
pushing arrows flash
constantly.
AE5603
Possible cause
Check power socket, fuse and cable connection.
a.Switch on display.
b.Check connecting, if cable broken,replace new one.
c.Contact Service person.
a.Switch on printer.
b.Load paper.
c.Reinstall driver of printer.
d.Replace ink box.
a.Reinstall driver of camera.
b.Check connection, if cable broken, replace new one
c.Contact service person replace camera.
a.Switch on 12V power.
b.Check and replace wire.
c.Replace 12V power.
d.Replace flash board.
a.Clean target piate by cleaning tools.
b.Clear obstacle.
c.Solve the problem according 4.
d.Solve the problem according 5.
Return last step, and click"remeasuring",and then
enter
Contact Service person and add the file
67
- 03 -
EN DE RU KO PT
Solution
JA ES