Notes On Digital Operation; Controllable Functions - Trix Rbe 2/4 606 Serie Manual De Instrucciones

Notes on digital operation

• The first time the locomotive is used in a digital system
(Selectrix or DCC), the decoder must be set for this digital
system. To do this, the decoder must be programmed once
in this digital system (Example: changing an address).
• The operating instructions for your central unit will give you
exact procedures for setting the different parameters.
• The values set at the factory were selected to guarantee
the best possible running characteristics.

Controllable Functions

Direction-dependent headlights
Interior lights
Red marker light
Sound effects: Locomotive whistle
Switching range (only ABV)
12
• This locomotive comes from the factory programmed for
the digital address "01" (Selectrix) / "03" (DCC) Number
of speed levels that have been set: 28 (DCC) and 31
(Selectrix).
• The setting done at the factory does not permit operation
with opposite polarity DC power in the braking block.
If you want this characteristic, you must do without
conventional DC power operation (CV 29 / Bit 2 = 0).
1
Central- Control
66800
1 2 3 4 5
6 7 8 9 ON
ST OP
PR Sx 1/2 Lz
on
Headlight button
— Function
— —
— —
— —
�� ��
5
S T O P
mobile station
Function f0
Function 1 Function f1
Function 2 Function f2
Function 3 Function f3
Function 4 Function f4
�� ��