Connect The Modules To The Electrodes; Preparing For Your Session; Warm-Up And Cool-Down - Compex WIRELESS Guia Del Usuario

SELECT AN OBJECTIVE OR A PROGRAMME
The steps for selecting an objective or a programme are similar.
SELECT AN OBJECTIVE
EN

4.2 CONNECT THE MODULES TO THE ELECTRODES

Stick the electrodes on your skin. Electrodes are
attached from the side. Slide the module along
the electrode snap until you hear a click.
Please note: Markings tell you which way to
insert: the On/Off button on the main pod and a
little vertical line on the shellthe other pod.

4.3 PREPARING FOR YOUR SESSION

WARM-UP AND COOL-DOWN

This screen is not available for all programmes.
You can choose to do the warm-up phase before starting the session and the cool-down phase at the end of the stimulation session.
Please note: Compex recommends that you keep the warm-up phase, unless you have already done a voluntary warmup, and the cool-down
phase.
User Manual
SELECT A PROGRAMME
Validate your selection
Select an item
Back to
main menu
Select (or not) the warm-up or cool-down phase
Back to previous screen
Validate your selection
WHEN AN OBJECTIVE IS SELECTED YOU CAN SEE THE DETAILS OF ALL THE
SESSIONS IT COMPRISES.
Validate your selection
Validate your selection
Select an item Select an item
Back to
main menu
Press for Info
menu
Please note: For voluntary sessions (cycling in this example), you have to
validate the session yourself by pressing the button under the icon
To disconnect the module from the electrode,
just do the reverse.
12
See the electrode placement
and body position associated
with your objective and
selected task. For programmes,
you will be able to view all the
possible electrode placements.
For objectives, you will see
what placement to use. To
scroll through the illustrations,
use the up/down button on the
multi-directional pad.
2
1
You can now place the
electrodes on your body and
connect the modules to them.
Press for Info menu
Back to the
previous screen
* 1. Body position
2. Electrode placement
*