n Frequency Step Selection
By default, the receiver automatically selects the frequency Steps most commonly used
for each band (see the Frequency Band chart for the default Steps for each band).
To select a different step :
1) In VFO mode press STEP.
) The following frequency steps are
available for your selection.
5 kHz
6.5 kHz (6. displayed)
8.33 kHz (8.3 displayed)
10 kHz
1.5 kHz
15 kHz
0 kHz
5 kHz
30 kHz
50 kHz
100 kHz
500 kHz
Auto
If Auto is selected the receiver will automatically select the appropriate default fre-
quency Step for each band.
Note : 8.33 KHz step is available only with specific band. (108.008
The Scanner supports the following Frequency Bands.
To select a band, repeat momentarily pressing the BANK BAND key until the preferred
band is selected.
Frequency Band
66 MHz to 87.475 MHz
87.5 MHz to 108 MHz
108.05MHz to 135.975MHz
136 MHz to 174.000 MHz
TSC-100R/100RBT
1
2
Start up Frequency
66 MHz
87.5 MHz
118 MHz
150 MHz
INSTRUCTION MANUAL
- 135.99 MHz)
3
FREQUENCY BANDS
Default Mode
Default Step
FM
WFM
AM
FM
5kHz
100kHz
5kHz
5kHz
11