Vfo Mode; Memory Read Mode(Memory Clear) - TTI TSC-100R Manual De Instrucciones

n VFO Mode
FUNCTION
Determines how long the receiver will wait on a
Busy Timer
busy channel while Scanning or Searching. When
'Busy' is selected, the receiver will stay on the
busy channel as long as it remains busy.
Beep
Activates or deactivates the key-press beeps.
Determines how long the radio will wait on a
Delay
frequency after a signal has disappeared while
scanning or Searching.
Attenuation
Reduces the receive sensitivity by -10dB.
Delta
Shifts frequencies.
Bluetooth
Activates or deactivates the Bluetooth compat-
Compatible
ible operation.
Operation
NOTE: Bluetooth compatible function works with TSC-100RBT model only.
n Memory Read Mode (and Memory Clear Function)
To access the Memory Read Mode.
Press Function MR.
1)
Press Menu, then use the Control knob or Volume keys to step through the menu items.
)
Press E/VFO and selected item shown is confirmed./VFO.
3)
FUNCTION
CH CLr Channel Clear
BK CLr Bank Clear
MEM CLr
All Memory Clear
NOTES for MEM CLEAR :
To erase ALL data from the memories
1) Press Menu, then use the Control Knob or the volume pqkeys to select 'MEM CLR.'
) Press E/VFO. 'dEF yES' will be displayed.
3) To continue with the MEM Clear, press E/VFO again.
4) To cancel the MEM Clear, use the Control knob to select 'dEF NO' then press E/VFO.
TSC-100R/100RBT
DESCRIPTION
MEANING
Erases the selected channel.
Erases all the channels in the selected Bank.
Erases all memories in the receiver.
INSTRUCTION MANUAL
VALUES
Busy, 5 Seconds
ON, OFF
1-10 Seconds
ON, OFF
-5kHz, -10kHz,
-15kHz, OFF
ON, OFF
DESCRIPTION
17