Beurer BC 42 Modo De Empleo página 13

GA BC 42_multi.qxp3 27.04.2001 17:20 Uhr Seite 13
c) Memory deletion:
• Use the (+) or (-) button to select the reading you want to delete
• Delete the reading selected from the memory by pressing the MENU button again
d) Languages
• You can select or change one of the 5 languages for the display with the (+) or (-)
button
e) Setting the clock
• Here you can set or change the date and/or time on the computer
f) Contrast
• Here you can set the brightness of the LCD display
• Adjustment between the values from 1 to 10 is made with (+) or (-)
• Setting 1 gives you the strongest contrast
• Press MENU to confirm
Always press the MENU button to confirm settings in the various menu items
The computer switches off automatically when you confirm changes with the MENU
button
Otherwise switch off with the START/STOP button (I/O)
If the computer is not used for 30 seconds, it switches off automatically
9. Error messages appear in the display when:
• cuff inflation takes longer than 25 seconds
• you move during the measurement instead of relaxing quietly
• insufficient pressure is reached despite extra inflation
• the blood pressure readings are extremely high or low
• the inflation pressure is higher than 330 mmgH
In the event of error messages, wait for a short time and measure again:
10. Cleaning
• Clean your blood pressure computer carefully only with a slightly moistened cloth
• Do not use detergents or solvents
• On no account must you immerse the computer in water, otherwise liquid can enter it
and cause damage
JAN
0:00
13
MEMORY CLEAR
LANGUAGE
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
ESPANOL
1 2001 FEB 15 2001
20:21
CONTRAST
ERROR
MEASURE
AGAIN