Velux KLI 110 Instrucciones página 4

ENGLISH:
ImPORtANt INFORmAtION
WARNING – tO REduCE tHE
RISK OF SEvERE INjuRy OR
dEAtH:
Read instructions carefully before installing and operating. Please keep
instructions for future reference and hand them over to any new user.
Safety
• Never let children play with the control keypad. The keypad should be
fitted out of reach of children at a minimum height of 5 feet (1.5 m).
• This device is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the device by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
device.
• The product must not be put into operation until it has been fitted
according to these instructions.
• Before operating, ensure that the product can be operated without risk
of damage to property or injury to people or animals.
• This product has been designed for use with genuine VELUX products.
• The control keypad is a Class 2 Low Voltage product (3 V d.c.).
• This device complies with part 15 of the FCC and RSS-210 of the IC
rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
• This device has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses
and can radiate radio frequency energy and, if not installed and used in
6 VELUX
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to
which thexreceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user's authority to operate the
device.
• FCC Radiation Exposure Statement: This device complies with FCC RF
radiation exposure limits set forth for an uncontrolled environment.
• The term "IC:" before the device certification number only signifies
that the Industry Canada technical specifications were met.
Installation
• The control keypad is for indoor use only.
• Installation in rooms with a high level of humidity and with hidden
wiring must comply with relevant regulations (contact a qualified
electrician if necessary).
• Before fixing the control keypad to the wall, verify that it can operate
the product in question from the proposed position.
• The control keypad should be fixed at a position where the product to
be operated is within sight.
Product
• The control keypad has a built-in RF (radio frequency) unit and will not
be operative if placed in a metal cabinet.
• Electrical products must be disposed of in conformity with all local
codes, ordinances, rules and regulations for electronic waste and not
with household waste.
• Used batteries have to be disposed of in conformity with the relevant
environmental regulations and ordinances.
• The packaging can be disposed of with usual household waste.
• Radio frequency band: 2.4 GHz.
VELUX 7