Analysis And Problems Solving; Problem, Causes And Solutions; Sharpening Of Knives - Skymsen HS-98 Manual De Instrucciones

5. Analysis and Problems Solving

5.1 Problem, causes and solutions.

The appliances were designed to operate with the need of minimum maintenance but
the natural wearing caused by longer use of the equipment may occasionally cause some
malfunctions.
If any problem occurs with your equipment, the most common situations are listed below
with recommended solutions.
Besides that, Skymsen has Authorized Technical Assistants that are happy to help. The List
of Authorized Technical Assistants can be checked in the website www.skymsen.com

5.2 Sharpening of Knives

For a good sharpening, make the equipment to work with less effort, and that is to increase
the useful of the components. Go to the Skymsen Authorized Technical Assistance to make
the correct sharpening.
5.2.1 Gear Box
The meat mincer is an appliance that works with a reducing box lubricated in oil.
To guarantee the useful life of the equipment for a longer time, verify in each 5000 hours
the oil level taking it to an Authorized Technical Assistance.
The oil quantity used in the meat mincer is 250 ml, and it is recommended the oil usage
UNITRON 140- CASTROL or similar oil with viscosity (SAE140, APIGL-4, ANP 1006).
16