Introduction; Safety Information - SATA 03055 Manual Del Uso

03055 /03075

Introduction

This multimeter is a handheld 3 -digit digital multimeter with automatic range and stable performance. It may be used for measuring DC/AC
voltage, DC/AC, resistance, continuity, diode and capacitance.
The meter has such functions as data hold, screen backlight, etc. Being easy to use, the meter is an ideal measuring tool.

Safety information

The meter is designed to conform to Pollution Degree 2 and Measurement Category III (CAT III 600V) as specified in IEC 61010.
Warning
To avoid electric shock and personal injury, please follow the following operating requirements:
- Do not use the meter if it is damaged. Check the casing before use, especially the insulation around the connectors.
- Check the insulation of the probes for damage or exposed metal. Check if the test probes are conductive. If a test probe is damaged,
please replace it with a new one for continued operation.
- Do not use the meter if it is not working properly. Its protective device may have been damaged. In case of any doubt, send the meter for
repair.
- Never use the meter near explosive gases, vapors or dust.
- Never apply a voltage greater than the rated voltage indicated on the meter between the terminals or between the ground and any
- 03 -
28
EN DE RU KO PT JA ES