Operation Instructions; Data Hold; Manual/Automatic Range - SATA 03055 Manual Del Uso

03055 /03075
EN DE RU KO PT JA ES
4. Make sure the fuse is intact before the thermocouple is used in the measurement.

Operation instructions

Data hold

Press "HOLD" button to allow the meter to enter the data hold mode. At that time, the current reading will be held on the screen and meanwhile
" " symbol appears on the screen as an indication.
Press "HOLD" button again to deactivate the data hold mode. At that time, the " " symbol will disappear.

Manual/automatic range

When the function with manual/auto range mode is selected, the meter enters automatic range mode first, and "Autorange" symbol appears on
the screen as an indication.
Press "RANGE" button to switch the meter into the manual range mode. At that time, the "Autorange" symbol will disappear. When the meter is in
the manual range mode, press "RANGE" button to set the range to a higher position. After reaching the highest position, the meter will return to
the lowest position.
Press and hold the "RANGE" button for more than 2 s to return to the automatic range mode.
- 03 -
43