Automatic Power-Off - SATA 03055 Manual Del Uso

03055 /03075
- Temperature measurement (only for 03057 model)
1. Insert the negative plug at the cold junction of the Type K thermocouple into "COM" jack, and the positive plug into "
2. Set the function switch to "℃ / ℉" position. And press "SELECT" button to select the unit of temperature: ℃ / ℉ .
3. Place the other end of the thermocouple at the place where the temperature measurement will occur.
4. Take the reading of temperature indicated on the screen.
Note
To avoid damage to the multimeter or other equipment, remember that the rated range of multimeter is -20-1000 ° C (-4-1832 ° F). The
Type K thermocouple supplied with the multimeter as a giveaway has the rating of 250, which is for reference only. It is a nonprofessional
product. To obtain accurately measured temperature, please use a professional grade thermocouple.

Automatic power-off

If not operated within about 15 min, the meter will be powered off and enter the sleep mode automatically. After automatic power-off, pressing
the button once or rotating the function switch will waken the meter.
If you press and hold " SELECT" button and rotate the function switch to "OFF" position at the same time, the automatic power-off function will be
deactivated, and" " symbol will disappear off the screen.
- 03 -
50
EN DE RU KO PT JA
" jack.
ES