Important - Movement Edge ABDUTOR Manual De Montaje

ATTENTION!
SAFETY AND MAINTENANCE OF
STEEL CABLES

IMPORTANT

The cables are wear, it is your
responsability in avoiding
unexpected cable break
The cable check out must be done
daily
Check out all the cables, the nylon
coating in every cable, and the
area near the fixation in eveery
cable extremity.
REPLACE ANY OF THE DAMAGED
OR WEAR CABLES IMMEDIATELY
DO NOT allow the equipment
being used until the wear or
damaged cables are replaced.
Either use or allow that any
equipment being used with a
suspected cable, it mat result in
several injuries.
See the manual for more
information.
ATTENTION
On the tower of each
equipment of the edge
line you find related
information to safety and
maintenance of the steel
cables.
CHECK OUT DAILY THE
QUOTED ITENS FOR THE
USER'S SAFETY
*The stickers place may vary according to
the model of the equipmenet.
TABLE
MAINTENANCE
Check operation and the
integrity of the
components. Inspect the
equipment as this table.
Replace any damaged,
broken or worn
components immediately
CABLES
Check tension, finishing and
coating.
make sure the lock nut on the
weight stack is tight
UPHOLSTERY / SEATS:
Clean and dry
Sanitize
STRUCTURES:
Clean and dry
Polishing / waxing
NUTS / BOLTS /
FIXING:
Press and or adjustments
GUIDES WEIGHTS:
Lubricate and clean
SEAT:
Clean and Sanitize
ADJUSTMENTS / LOCK PIN
LOCK PIN WEIGHTS
WARNING STICKERS
HANDLES / BEARING
FOR MORE INFORMATION, READ THE
INSTRUCTION MANUAL OF THE PRODUCT
9
INSTRUCTIONS
MAINTENACE TABLE
In the tower ow each
EDGE line equipment you
find a MAINTENANCE
TABLE
The table suggests the
checking out of several
equipment items, as well
the frequency of
checking
* The stickers's local may vaty according
to the equipment model.