Home Decorators Collection 51748 Guía De Uso Y Mantenimiento página 7

Assembly - Standard Ceiling Mount
1
Preparing for mounting
□
Remove the canopy cover (HH) from the canopy (C) by turn-
ing the bottom cover counter-clockwise until it unlocks.
□
Loosen the two canopy screws (GG) located in the bottom
of the mounting bracket (A), and turn the canopy counter-
clockwise to remove the mounting bracket from the canopy
(C).
3
Assembling the fan
CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(KK) must be completely tightened
NOTE: This fan is equipped with a safety tab (II). Should
the setscrew (KK) ever become loose while the fan is
running in reverse, the safety tab (II) will engage and stop
the fan from falling.
□
Loosen, but do not remove, the setscrew (KK) on the collar (JJ)
on top of the fan-motor assembly (E).
□
Install the downrod (B) by inserting it into the motor collar (JJ),
and turning it clockwise until it is tight.
□
Re-tighten the setscrew (KK) on the collar (JJ) on top of the fan
motor assembly (E).
2
Routing the wires
□
□
□
A
GG
C
HH
7
Route the wires exiting the top of the fan motor
assembly (E) through the decorative motor collar cover
and then the center of canopy bottom cover (HH).
Make sure the opening of canopy (C) is on top and
insert the ball/downrod (B) through the canopy (C).
Route the wires exiting the top of the fan motor
assembly (E) through the downrod as shown.
KK
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
C
HH
D
B
E
B
II
JJ
E