Cleaning And Maintenance; Precautions Before Cleaning; Routine Cleaning - klover PB 35 Instalación, Uso Y Mantenimiento, Consejos Útiles

CLEANING AND MAINTENANCE

Precautions before cleaning

Before carrying out any cleaning or maintenance, make sure that:

The boiler is off and has cooled down completely;

The ash is completely cold;

Before re-starting the boiler, re-install all previously disassembled components.
For cleaning operations, personal protective equipment should be worn.i.e. gloves, goggles and dust masks, as directed in eu 89/391/EEC.
The frequency for cleaning depends on the type and quality of the burned pellet.. Therefore, the schedule indicated below may vary.
Any problem to the boiler caused by the lack of cleaning will not be covered by the warranty.

Routine cleaning

The boiler requires periodical cleaning at least every 20 days of functioning or after 3-4 ignitions, to always guarantee efficiency and optimal functioning.
ATTENTION: use suitable "bin" type vacuum cleaners, with fine mesh filter, in order to prevent part of the ash from being spilled back out into the
environment and damage the suction device itself.
Carefully clean the brazier from combustion residues, by removing it from its seat.
Use a vacuum cleaner to remove the ash that is deposited under the brazier.
Empty the ash drawer.
10