15) Do not put the discarded battery pack in fire or dispose it with domestic garbage, and be sure to send it to the local collection
station or recycling point.
16) Carefully check for the cable, natural gas or water pipes before driving the screw or drilling the hole in the wall, floor and ceiling.
17) Wear the earmuffs when operating the machine. Otherwise the hearing may be damaged.
18) During the operation, it is normal for the accessories and metal parts to heat up.
19) The operating machine may come into contact with the hidden wires. Therefore, be sure to hold the insulating surface of machine.
Contact with the live wires may electrify the metal on the surface of machine and cause an electric shock of user.
Warning:
Battery pack leakage may occur if the operating temperature is too high or the pack is excessively used. If the liquid leaking
from the battery gets on the skin, wash it with soap first, then rinse it with lemon juice or vinegar. In case of contact with the
eyes, rinse the eyes with clean water immediately and go to the hospital for treatment.
Safety warning of electric wrench:
1 ) If the fastener may touch the concealed line, hold the tool at the insulating surface. The fastener touching the live wire may cause
the exposed metal parts of tool to be electrified to shock the operator.
2 ) Please wear the earmuffs.
3 ) Please check the sleeve for any wear, crack or damage before installation.
4 ) Please hold this tool firmly.
5 ) Be sure to stand firmly and make sure that no one is underneath when using the tool at height.
6 ) The tightening torque may vary depending on the type or size of bolt and the material of workpiece to be fastened.
Safety warning of charger:
1 ) Please read the instruction before use.
2 ) Only for indoors, no rain or water.
3 ) Do not charge the non-rechargeable battery.
4 ) The damaged power cord shall be replaced by the manufacturer, its service department or similar professional technicians, to
avoid dangers.
14
51073
中文
EN
DE
RU
KO
PT
JA
ES