Home Decorators Collection 91122 Guía De Uso Y Cuidado página 7

Assembly - Standard Ceiling Mount
1
Preparing for mounting
□
Remove the canopy ring (D) from the canopy (C) by turning
the ring counter-clockwise until it unlocks.
□
Remove the mounting bracket (A) from the canopy (C) by
loosening the two canopy screws (JJ) located in the "L
shaped" slots.
□
Remove and save the two canopy screws (HH) and lock
washers (WW) in the round holes. This will enable you to
remove the mounting bracket (A).
JJ
3
Assembling the fan
CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(RR) must be completely tightened
NOTE: This fan is equipped with a safety tab (SS). Should
the setscrew (RR) ever become loose while the fan is
running in reverse, the safety tab (SS) will engage and
stop the fan from falling.
□
Remove the setscrew (RR) by turning it counterclockwise.
□
Install the downrod (B) by inserting it into the motor collar (TT),
and turning it clockwise until it is tight.
□
Reinstall the setscrew (RR) turning clockwise until tight.
2
Routing the wires
□
Route the wires exiting the top of the fan motor (F),
through the coupler cover (E), and canopy ring (D).
□
Make sure the slot openings are on top and route the
wires through the canopy (C) and then through the
ball/downrod assembly (B).
C
A
D
WW
E
B
HH
C
F
D
B
SS
7
Please contact 1-800-986-3460 for further assistance.
RR
TT
HOMEDEPOT.COM/HOMEDECORATORS