- Upper Wheel
- Lower Wheel
- Blade Scraper
- Wheel Scraper
- Blade Tension Regulator
Follow the below instructions to remove the above mentioned parts:
- Upper Door
Open the door #.04 (Pic.01), and lift it.
- Lower Door
Open the door # 15 (Pic.01), and lift it.
- Blade Guard
Turn counter clockwise the two handles, just enough to loose the Blade Guard # 01 (Pic
03), then remove the Blade Guard pulling it towards the saw front side.
- Movable Table
Pull totally the Movable Table #.09 (Pic.01) towards the saw front side.
Displace the end plate, see picture 04, and slide the Movable Table completely out of the
rollers.
PICTURE 03
PICTURE 04
01
11