Making Cold Frothed Milk - Bellarom BMAD 550 A1 Instrucciones De Uso

7) Wait about 30 seconds. During this time the still liquid milk fl ows to the bottom.
8) Remove the lid 1 and pour the milk froth into the desired container to make,
for example, a cappuccino.
Wait about 2 minutes before you froth up another portion of milk.

Making cold frothed milk

1) Place the frothing whisk 3 onto the drive shaft inside the jug.
2) Remove the jug from the base 5 and fi ll it with cold milk. Fill the jug with
milk to at least the MIN mark inside the jug. However, never fi ll it with milk
beyond the lower MAX mark (
When frothed, the volume of the milk increases signifi cantly!
3) Place the jug on the base 5.
4) Put the lid 1 on.
5) Press and hold the on/off button 4 until the integrated control lamp lights
up blue and the frothing whisk 3 starts to turn.
6) The appliance switches itself off and the integrated control lamp goes out as
soon as the milk is frothed.
NOTE
► If you wish to stop the preparation process beforehand, press the "on/off "
button 4. To restart preparation, press and hold the "on/off " button 4 until
the integrated control lamp lights up blue and the frothing whisk 3 starts
to turn.
7) Wait about 30 seconds. During this time the still liquid milk fl ows to the bottom.
8) Remove the lid 1 and pour the milk froth into the desired container to make,
for example, a cappuccino.
BMAD 550 A1
). Otherwise the appliance may overfl ow.
GB │ IE │
23 ■