Festo CPX Serie Manual De Instrucciones página 18

3.2 Fitting
Dismantling the sub-base or replacing the electronic module:
– It is not necessary to remove the plugs and cables con-
nected to the sub-base.
Removing the I/O module:
1. Remove the screws and carefully lift up the sub-base.
2. If required: Pull the electronic module carefully away
from the contact rails.
1 Screws, tightening
torque 0.9...1.1 Nm
Sub-base
2
3 Electrical plug
connection
4 Electronic module
5 Contact rails
6 Manifold sub-base
18
1
2
3
4
5
6
Festo CPX-EA 0201NH English