Festo CPX Serie Manual De Instrucciones página 25

Continuation type
Digital outputs
– Rated load voltage
– Design
– Protection against incorrect
polarity
– Output current per channel
– Short circuit protection
– Voltage drop at output
– Output delay
– signal change "0" to "1"
– signal change "1" to "0"
– Parallel switching of outputs
for increased performance
– Protection against reverse
voltage
– Limiting the inductive switch-
off voltage of connected
coils/solenoid valves
Electrical isolation
– Inputs
– Outputs
– between the channels
– to V
EL/SEN
Isolation
Festo CPX-EA 0201NH English
CPX-8DE-8DA
8 outputs as per IEC 1131, 24 V
V
OUT
Positive logic (PNP)
Yes
Min. 0.5 A (12 W lamp load), no sum
current limit
Yes (electronic),
response threshold> 0.5 A
≤ 1 V
With ohmic load:
< 200 µs
< 200 µs
Yes, max. 4 outputs (O0...O3 or
O4...O7) of the same module
Max. V
OUT
Typ. -16 V
None
None
Yes, with intermediate supply
Tested with 500 V DC
25