Brakes - Wayscral TAKEAWAY E-200 Manual Del Usuario

it before using the bicycle. The manufacturer provides a pressure range
on the side of the wheel rim and in the following table. The pressure
should be adapted to the weight of the user.
Model Bike size
TAKEAWAY
E-200

2. Brakes

Before each use, check that the front and rear brakes are in perfect
working order.
The lever on the right activates the rear brake. The lever on the left
activates the front brake.
It is recommended that you distribute your braking force approximately
60/40 between the front and rear. The brake lever should not be in
contact with the handlebars, and the sheaths should not be bent at right
angles so that the cables can slide with a minimum of friction.
Damaged, frayed or rusty cables must be changed immediately.
WARNINGS:
•
•
•
Mechanical disc brake adjustment
Discs: your bicycle is fitted with 160 mm diameter discs. The pads
exert pressure on a disc attached to the wheel hub. The intensity of the
pressure is controlled by a lever connected to the brake by a cable. Do
(inner tubes and tyres)
20"
20 x 4
In rain or damp weather, braking distances are
longer. It is recommended to pre-empt your
braking in this situation.
When cornering and braking, the handlebars can
have a negative influence on the response time of
the cyclist.
Do not touch the disc brakes after heavy use of the
braking system on your power-assisted bicycle, as
they could burn you.
Size
60
Pressure
PSI Bar
20 1.3
EN