Kohler K-3341 Guia De Instalacion página 5

Sealant
Stud
Sink
Self-Rimming Installation
13-1/2"
(34.3 cm)
Undercounter Clip Locations
2. Install the Sink
Self-Rimming Installations
WARNING: Risk of personal injury. Metal surfaces are sharp
and can cause severe cuts. Use gloves and handle sink edges
carefully.
Cut out the countertop opening by carefully following the pencil
line traced from the template.
Temporarily position the sink in the countertop opening. Verify
the fit and position.
Remove the sink from the countertop.
Drill the faucet holes according to the faucet installation
instructions.
Install the strainer to the sink according to the strainer
manufacturer's instructions.
Apply a bead of sealant around the entire underside of the sink
rim between the stud and rim edge. Follow the instructions listed
on the sealant label.
Place the sink into the cut-out hole and position.
Assemble the appropriate clip and wing nut to the stud and
tighten.
Draw the rim down firmly to the countertop. Do not overtighten.
Remove any excess sealant using a damp cloth.
Kohler Co.
Sealant
Marble Slab / Solid Surface
Sealant
13-1/2"
(34.3 cm)
Wood Countertop
Undercounter Installation
5
Insert
Sink
Countertop
Sink
1019945-2-B