Transport; Chain Loading Procedures - Nogueira VMN 4.0 Manual De Instrucciones

Transport

If the machine (wagon) is not approved for travelling on public roads, it must be transported another
way. The loading operation of the machine is dangerous, and it must be performed by specialized and
experienced personnel.

Chain Loading Procedures

Use transport means adequate for the weight of this machine. Exclusively use the
four hooks located in the inside upper part of the bin, abiding by diagram below and
performing the loading operation using adequate lifting equipment recommended
for the weight of this machine.
1- Remove the machine from its storage place and transfer it to
the loading zone.
2- Place the gantry crane or other adequate lifting equipment,
for moving it to the loading zone.
3- Select a lifting chain strong enough for the weight of this
load.
4- Verify the strain resistance of the coupling points on the
wagon (welding etc).
5- Couple the chain correctly (fig.1).
6- Verify to make sure nobody is near the loading operation
zone.
7- Check the effectiveness of the support plane and the
availability of space around the loading zone.
8- Lift the wagon and place it on the support base on the tires
and the tow bar (fig.2).
9- Get on the wagon (using adequate equipment, for example,
a platform ladder) and release the chains from the gantry
crane.
10- Remove the chains and move the gantry crane outside the loading zone.
11- Place and immobilize using wooden shims below the wagon tires (item.A) and a shim below the tow
bar (item.B), tie the machine using 4 ropes (item.C) to the appropriate hooks and identified by the
labels.
12- Verify if the wagon is completely immobilized in the truck (item.C).
13- Move the truck away from the loading zone, making sure nobody is around it.
C
Mixers Wagons VMN 4.0 / 6.0 / 8.0
A
fig.1
C
C
B
fig.2
MAX 130°
A
C
B
15