Connecting A Tape Deck, Cd Recorder Or Md Recorder; Connecting A Vcr; Connecting The Antenna Terminals - Denon AVR-1306 Instrucciones De Operación

Connecting Other Sources

Connecting a tape deck, CD recorder or MD recorder

• If humming noise is generated, move the tape deck further away from the source of such noise.

Connecting a VCR

If you wish to perform analog dubbing from a digital source, such as a DVD recorder to an analog
recorder such as a cassette deck, you will need to connect the analog inputs and outputs as shown
below, in addition to the digital audio connections.
NOTE:
• When recording to a VCR, it is necessary that the type of cable used with the playback source
equipment be the same type that is connected to the AVR-1306 VCR OUTPUT terminal.
→ Video cable : VCR OUT → Video cable
Example: VCR IN
An FM antenna cable plug can be connected directly to the unit.
Tape deck /
CD recorder /
Direction of broadcasting
MD recorder
station
AUDIO OUT
A
L
L L
R R
R
AUDIO IN
A
L
L L
R R
R
Video deck
F
VIDEO
OUT
2 AM loop antenna assembly
F
VIDEO
IN
A AUDIO IN
L
L L
R R R
A AUDIO OUT
L
L L
R R R
10
ENGLISH

Connecting the antenna terminals

AM loop
antenna
FM antenna (Supplied)
75 Ω/ohm
COAXIAL
cable
FM indoor
antenna
(Supplied)
AM outdoor antenna
Ground
Connect to the AM
antenna terminals.
1 2
3
Remove the vinyl tie
Bend in the reverse
and take out the
direction.
connection line.
4
a. Antenna placed on
a stable surface.
Mount
b. Hanging the
antenna on a wall.
Use the
installation hole to secure the antenna to a wall, etc.
ENGLISH
Connecting Other Sources
NOTE:
• Do not connect two FM antennas
simultaneously.
• Even if an external AM antenna is
used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna
lead terminals do not touch metal
parts of the panel.
Connection of AM antennas
1. Push the lever.
2. Insert the conductor.
3. Return the lever.