Denon Original Surround Modes; Surround Modes And Their Features - Denon AVR-1306 Instrucciones De Operación

Basic Operation

DENON original surround modes

This unit is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically
recreate the sound field. One of 7 preset surround modes can be selected according to the program source and the parameters can
be adjusted according to the conditions in the listening room to achieve a more realistic, powerful sound.

Surround modes and their features

The front left channel signals are output to the surround left channels, the front right channel signals are
1 5CH STEREO output to the surround right channels, and the in-phase component of the left and right channels is output
to the center channel. Use this mode to enjoy stereo sound.
MONO MOVIE
2 Select this when watching monaural movies for a greater sense of expansion.
(NOTE)
Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all
3 ROCK ARENA
directions.
This mode creates the sound field of a live house with a low ceiling and hard walls. This mode gives jazz
4 JAZZ CLUB
a very vivid realism.
5 VIDEO GAME Use this to enjoy video game sources.
Select this to emphasize the sense of expansion for music sources recorded in stereo. Signals consisting
6 MATRIX of the component difference of the input signals (the component that provides the sense of expansion)
processed for delay are output from the surround channel.
7 VIRTUAL Select this mode to enjoy a virtual sound field, produced from the front 2-channel speakers or headphones.
Depending on the program source being played, the effect may not be very noticeable.
In this case, try other surround modes, without worrying about their names, to create a sound field suited to your tastes.
NOTE: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel (left or right),
so input signals to both channels. If you have a source component with only one audio output (monophonic camcorder, etc.)
obtain a "Y" adapter cable to split the mono output to two outputs, and connect to the L and R inputs.
2 Personal memory plus
This set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes selected
for the different sources. When the input source is switched, the modes set for that source last time it was used are automatically
recalled.
The surround parameters, tone control settings and playback level balance for the different output channels are memorized for
each surround mode.
24
ENGLISH
ENGLISH
Basic Operation