Interactive Controls; Storage - Sub-Zero PRO Serie Guía De Uso Y Mantenimiento

Interactive Controls

Interactive Touch Controls
For initial start-up, touch and hold Power on either
external touch display, located on the grille.
Temperature can be adjusted in one-degree increments.
The left and right external displays control different tem-
perature zones in the unit, but can both access the settings
menu.
EXTERNAL TOUCH DISPLAY
To unlock the display, touch and hold for three seconds.
The display will lock automatically after 30 seconds of
inactivity. Refer to the illustrations below.
To adjust the temperature, touch the temperature dis-
played next to the corresponding zone icon.
To turn the ice maker on or off or to active max ice,
touch .
-18 3 3
C C
Freezer display Refrigerator display
(914 mm model shown) (914 mm model shown)
SETTINGS
To access the Settings menu, touch
touch display.
SETTINGS
Activate or deactivate power to the unit
Enable or disable automatic display lock
Activate, deactivate, or refresh purifier life reminder
Enable or disable door/drawer alarm and duration
Enable or disable connect
Enable, disable reminder, or refresh filter life reminder
Enable or disable Sabbath mode
Adjust soft on lighting and accent lighting (if applicable)
C
Adjust temperature units
Adjust alarm volume and tone
Select language
View troubleshooting and service information

Storage

Keeping Food At Its Best
DUAL REFRIGERATION ®
on either external This Sub-Zero features a unique Dual Refrigeration
system to keep food fresher longer. Three separate
controls allow the refrigerator, refrigerator drawer(s), and
freezer to be set at different temperatures.
With the Sub-Zero Dual Refrigeration
refrigerator and freezer systems have been designed to
maintain accurate, consistent temperatures and proper
humidity levels for longer food life expectancy. Dual
Refrigeration ® eliminates transfer of fresh food odors to
frozen food and ice and does not freeze the moisture out
of the air in the fresh food section.
For handy tips and information on how to maximize food
freshness, refer to the freshness cards stored in the refrig-
erator.
Refrigerator Storage
GLASS SHELVES
® To remove or adjust a glass shelf, tilt up, then lift up and
out. To reposition, insert the shelf in the tracks along the
back wall, then lower the front until it locks into position.
Refer to the illustration below.
® system, individual IMPORTANT NOTE: Use care when handling glass shelves
to prevent breakage or scratching of the interior.
CAUTION
Warm glass shelves to room temperature before
immersing in warm water.
SLIDE-OUT BINS
Integrated rails mounted below the glass shelves allow
slide-out bins to be positioned in a variety of locations. To
remove or adjust a slide-out bin, pull the handle of the bin
forward until it stops, and lift up and out of the rails. Refer
to the illustration below.
Glass shelf removal Slide-out bin removal
subzero.com | 5