Tools and Materials
Silicone
Masking
Sealant
Tape
Center
Punch
Assorted
Screwdrivers
Before You Begin
CAUTION: Risk of eye injury. Always wear safety glasses when cutting or drilling.
CAUTION: Risk of injury. Tempered glass cannot be cut.
IMPORTANT! Pay special attention to the section titled "Important Instructions." Failure to follow the
directions could result in product damage.
NOTE: When using a retractable case tape measure, make sure that you add the length of the case to the
measurement, or measure in a manner that excludes the case.
Lay out and identify the parts. Inspect them for damage.
Return the glass panels to their packaging and place them in a safe area until they are needed.
The bath/shower should be installed at this time, including finished wall materials.
1211021-2-A
Level
Caulk Gun
Miter Saw or Hack Saw
with 32 Teeth Per Inch Blade
Pencil or Felt
Tip Marker
Miter Box
2
Plus:
• Drop Cloth
• Tile or Masonry Bit
(if installing onto tile walls)
Drill
5/64"
1/8", 5/32" and
5/16" bits
Sterling