Kohler Sterling 4700 Serie Manual Del Usuario página 6

Install the End Panel (cont.)
Install the Non-Adjustable In-line Connector Jamb and 90° Transition Jamb
NOTE: The edge of the transition jamb should be flush with the knee wall edge.
Fit the short non-adjustable in-line connector jamb onto the opposite end of the end panel frame.
Drill three 1/8" holes through the non-adjustable in-line connector jamb and end panel.
Secure the end panel to the non-adjustable in-line connector jamb with #8-18 x 3/8" screws.
Fit the short 90° transition jamb onto the non-adjustable in-line connector jamb and secure it with
#8-18 x 1-1/4" screws.
1211021-2-A 6 Sterling