Festo CPX Serie Instrucciones Para El Usuario página 26

Continuation type
Short circuit protection
Voltage drop at output
Output delay
from 0" to 1"
from 1" to 0"
Parallel switching of outputs
for increased performance
Protection against reverse
voltage
Limiting the inductive switch−
off voltage of connected
coils/solenoid valves
Electrical isolation
Between the channels
For operating voltage supply
for electronics/sensors
(V )
EL/SEN
Isolation
26
CPX−4DA
Yes (electronic), response threshold
Min. 1 A
1 V
With ohmic load:
< 200 s
< 200 s
Yes, max. 4 outputs of the same
module:
O0...O3
Max. V
OUT
Typ. −16 V
None
Yes, if an intermediate supply or
manifold sub−base type CPX−GE−EV−
S−7/8−5POL is used
Tested with 500 V DC
Festo CPX−EA 0503a English
CPX−8DA
Min. 0,5 A
O0...O3/O4...O7