The Control Panel - EAS ELECTRIC EMD14AZI Manual De Instrucciones

THE CONTROL PANEL

3 1 2
1. On/Off button
2. Programme button
3. Display
4. Half Load button
i. Upper Basket - Half Load led
ii. Lower Basket - Half Load led
5. Delay button
6. Options button
iii. Energy Save led
iv. Extra Dry led
v. Extra Silent led
7. Salt lack warning indicator
8. Rinse Aid lack warning indicator
1. On/Off Button
Turn the machine on by pressing On/Off
button. When machine is on, "--" will be
shown on the Display (3).
2. Programme Button
Select a suitable programme for your
dishes by pressing Programme button. The
programme will start automatically when the
door is closed.
3. Display
The Display shows the number and
duration of the selected programme
alternately and the remaining time during
operation.
4. Half Load Button
Press the Half Load button to select the
area of the dishwasher that contains the
dishes to be washed. You can select both
baskets, the upper basket only, or the lower
basket only. Press the button until the led
(i,ii) corresponding to the basket contaning
the dishes to be washed illuminates. Dishes
in other areas will not be washed.
İİİ
İ İİ
7
v
8
4 5 6 iv
5. Delay Button
Press the Delay Start button to delay the
start time of a programme for 1 hour up to
19 hours. Pressing once will delay the start
time for 1 hour, and continuing to press
the button will increase the delay duration.
Press the Delay button to change or cancel
the delayed start. If you turn off the machine
after activating the delay time, the delayed
time is cancelled.
6. Options Button
Press the Options button once to activate
the Energy Save option. Select the
Energy Save option to enable the door
of the machine to open at the end of the
programme to increase drying efficiency.
This function also saves energy by
operating at a lower temperature. Energy
Save led (iii) will illuminate.
Press the Options button twice to activate
the Extra Dry option. Select Extra Dry
option to add extra drying steps to a
programme in order to obtain drier dishes.
This option increases water temperature
of the final rinse step and duration of the
drying step. Extra Dry led (iv) will illuminate.
Press the Options button three times to
activate the Extra Silent option. Select
Extra Silent option to decrease the water
pressure, therefore providing a more
sensitive and silent wash. This option
can only be selected at the beginning
of a programme. Extra Silent led (v) will
illuminate.
NOTE: If an extra feature has been
used on the most recent wash programme,
this feature will remain active on the next
selected programme. To cancel this feature
on the newly selected wash programme,
press the feature button until the light on
the button switches off.
7. Salt lack warning indicator
When there is insufficient softening salt, the
Salt Lack Warning Indicator will illuminate to
indicate the salt chamber needs filling.
8. Rinse Aid lack warning indicator
When there is insufficient rinse aid, the
Rinse Aid Lack Warning Indicator will
illuminate to indicate the rinse aid chamber
needs filling.
EN - I9
V.1