37Z0A6000.fm 5 ページ 2020年4月27日 月曜日 午後1時34分
5. SINGLE LEVER TYPE:
If the control lever has been moved to the CHOKE position to start the
engine, gradually move it to the MIN. position as the engine warms
up.
CONTROL LEVER
DUAL LEVER TYPE:
If the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine warms
up.
CHOKE LEVER
STOPPING THE ENGINE
To stop the engine in an emergency, simply turn the engine switch to the
OFF position. Under normal conditions, use the following procedure.
Refer to the instructions provided by the equipment manufacturer.
1. Move the control lever (single lever type) or throttle lever (dual lever
CHOKE
SINGLE LEVER TYPE
MIN.
2. Turn the engine switch to the OFF position.
3. If the fuel tank is equipped with a valve, turn the fuel valve to the
CLOSED
SETTING ENGINE SPEED
OPEN
Position the control lever (single lever type) or throttle lever (dual lever
type) for the desired engine speed.
Some engine applications use a remote-mounted control rather than the
engine-mounted lever shown here. Refer to the instructions provided by
the equipment manufacturer.
For engine speed recommendations, refer to the instructions provided
with the equipment powered by this engine.
SINGLE LEVER TYPE
Do not disconnect the battery from the engine while the engine is
running. Disconnecting the battery causes the fuel-cut solenoid to shut
off the flow of fuel to the carburetor main jet, and the engine will stop.
ENGLISH
type) to the MIN. position.
Some engine applications use a remote-mounted throttle control
rather than the engine-mounted throttle lever shown here.
DUAL LEVER TYPE
MIN.
CONTROL LEVER
CLOSED or OFF position.
MAX.
MIN.
CONTROL LEVER
MIN.
THROTTLE LEVER
DUAL LEVER TYPE
MAX.
MIN.
THROTTLE LEVER
5