Error Messages - Panasonic PT-47WXD63 Instrucciones De Operación

Photo Viewer™ Operations (Cont.)
Photo Viewer™ Setup Menu
This menu allows you to customize features in the Photo
Viewer™ Setup menu.
Procedure
• Highlight Photo Viewer™ icon and press OK button to
display the thumbnail screen.
• Press the SD button on the remote control to display the
Setup screen.
• Use the CH ,
the setup menu.
100-001
Setup Menu
Slide Show
Interval
Sequence
Repeat
Rotate
Card
SELECT
CHANGE
Date
Pixel
Slide Show - Allows you to start the slide show by pressing
the OK button while Start is highlighted. Press OK button to
stop the Slide Show.
Note: When you are in the Slide Show mode, you can change
the Aspect of the image on screen by pressing the
ASPECT button on the remote control.
Interval - Allows you to change the length of time that a slide
is being displayed on screen. Available settings are: 5sec,
10sec, 15sec, 30sec, 60sec, 90sec and 10 minutes.
Sequence - Select either Order or Random.
Repeat - Select Off or On.
Note: After setting Interval, Sequence or Repeat, press CH
button to select Start, then press OK to start the Slide
Show.
Rotate - Allows you to rotate the image.
Zoom - Lets you select the magnification of the Single Slide
display.
Procedure
• While in the Single Slide display mode, press SD button
to display Photo Viewer™ Setup Menu. Zoom option will
be displayed in the Setup Menu.
• Highlight Zoom and press OK button.
• Press VOL or VOL
• Press OK button. To move the image in the picture
frame, press the navigation buttons.
• Press OK to view the slide in normal magnification.
Card - Select either SD or PC when both cards are inserted in
the slots.
VOL or VOL keys to navigate in
0001/0066
Return
Start
5Sec
Order
OFF
Left
SD
OK
EXIT
: 07/04/2002
: 1600 x 2000
button to select To Fit, x2 or x4.
Following are some of the error messages that may be displayed
on-screen when certain conditions are not met or exceeds the
Photo Viewer™ specifications.

Error messages

Error condition
When inserting Card
If the JPEG file is corrupted
and cannot be decoded.
If the card is not formatted with
FAT 12 or FAT 16 or if it is not
DCF standard.
If thumbnail and main picture
cannot be shown
Over 3000 image files
Resolution over
If incompatible card is inserted
Photo Viewer™ Troubleshooting
Symptoms
Cannot read the content of
the card
PC card cannot be ejected
Poor picture quality
Long time to display
Notes:
• If thumbnail screen or a single slide image is displayed
for longer than 10 minutes, Image shift (refer to page 26)
feature will be activated to prevent image retention. The
image on-screen will zoom-in and zoom-out in 4 (four)
steps.To exit this mode, press OK button or select
another slide or press any button.
• During the Slide show, the Image shift feature will
activate if the image is displayed longer than 5 (five)
minutes. The image will be shifted horizontally (left or
right) in minute increments. Image shift feature will not
activate, if it is turned Off.
M O
ENU PERATIONS
Error messages displayed
on-screen
No card or Card is not inserted
correctly
This type of image is not supported.
This type of format is not supported.
This icon will appear where
thumbnail image will.
Photo Viewer™ cannot support over
3000 JPEG files.
Photo Viewer™ cannot support over
8192 x 8192 pixels.
This type of card is not supported.
Solutions
A) Not compatible format. Must be
formatted with FAT 12 or FAT 16.
B) The extension is not "JPG".
Photo Viewer™ can display EXIF
standard JPEG file, and JPEG
file which is not EXIF standard
cannot be shown.
C) The folders not under DCF
standard.
Push the card all the way in, and
eject.
If the main image cannot be read
(the file is partially corrupted), the
Photo viewer™ will read the
thumbnail. Please confirm the
format of the image.
It will take long time to display, if
there are lots of images or if the file
size is big.
23