Mounting The Machine Side Hose Assembly; Connecting The Cooling System - Abicor Binzel MT Instructivo De Servicio

MT/AUT/AUT RAB

6.3 Mounting the machine side hose assembly

1
11
1 Hose assembly
2 Coolant return hose
3 Coolant supply hose
4 Re-circulating cooling unit
(only with liquid-cooled torches)
Fig. 5 Mounting the hose assembly on the machine side

6.4 Connecting the cooling system

2
10 9
5 Wire basket spool
6 Shielding gas cylinder
7 Power supply
8 Wire feed unit
NOTE
• Check once again whether the wire guide has been fastened correctly.
1 Combine central plug (10) and central socket (9) at the wire feed unit (8)
and secure them with the connecting nut (11).
WARNING
Risk of burns
Welding torches will become overheated if the coolant level is too low.
• Wear protective gloves.
• Check the coolant level at regular intervals.
NOTE
• Applies only to liquid-cooled welding torches.
• Make sure that the coolant supply and return have been installed
properly. Coolant supply = blue, Coolant return = red
6 Putting into operation
3
8
9 Central socket
10 Central plug
11 Connection nut
4
5
6
7
EN - 13