EN
1 The console does not come on
2 The console does not come
on
When the main power switch
and the key switch are both
turned to "I" the console remains
switched off.
3 The starter motor does not
turn
With the key switch turned to "I"
the display comes on but when
the "START/STOP ENGINE"
button is pressed the starter
motor does not turn.
4 The starter motor turns but
the engine does not start
With the key switch turned to "I"
the display comes on but when
the "START/STOP ENGINE"
button is pressed the starter
motor turns but the engine does
not start.
5 The battery indicator and
digits flash.(740 IOX, 540 IX).
The message "BATT" appe-
ars (340 IX) (340 IX)
When attempting to start the
machine, the machine does not
start, the "Battery" indicator and
the text on the digits starts to
flash indicating that the voltage
is lower than 12V.
6 The battery indicator and
digits flash. (740 IOX, 540 IX).
The message "BATT" appe-
ars (340 IX) (340 IX)
The "Battery" indicator and the
text on the digits start to flash
indicating a voltage over 12V.
7 The battery indicator and di-
gits flash and then the engine
dies (740 IOX, 540 IX) The
message "BATT" appears
(340 IX).
The "Battery" indicator and the
text on the digits start to flash in-
dicating a voltage over 12V then
the machine turns itself off.
26
ENGLISH
Main power key switch set to "O".
Battery not connected.
Battery completely flat.
Fuse (20A) blown.
Battery not charged enough.
Fuel cock closed.
No fuel flow.
Ignition fault.
Battery not charged enough.
Recharging fuse (25A) blown.
Faulty battery.
The text on the digits indicates
a voltage over 12V; there is an
overvoltage.
The battery has exceeded the over-
voltage threshold.
(Translation of the Original Instructions)
Turn the main power key switch to "I"
Turn the key switch and the main
power switch to "O" and:
Check the battery connections.
Recharge the flat battery.
Replace the fuse.
Recharge the flat battery.
Open the fuel cock.
- Check the fuel level in the tank.
- Check the fuel filter.
- Check the spark plug cap is secu-
rely in place.
- Check the spark gap and that the
electrodes are clean.
Charge the battery.
Replace the fuse.
Replace the battery.
Contact an authorised assistance
centre.
Contact an authorised assistance
centre.