Playing Songs On Ipod; Listening To Songs On Your Ipod; Selecting A Playlist; Displaying Text Information On Ipod - Pioneer DEH-P70BT Manual De Instrucciones

Section
10

Playing songs on iPod

Listening to songs on your
iPod
1
You can use this unit to control an iPod adapter,
which is sold separately.
These are the basic steps necessary to operate
an iPod adapter. More advanced iPod adapter
operation is explained starting on Introduction
of advanced iPod adapter operation on the next
page.
1 Source icon
Shows which source has been selected.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent song.
3 Song number indicator
Shows the number of song played in the se-
lected list.
4 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from the
actual signal level.
5 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
from the actual battery strength.
1 Press SOURCE to select the iPod.
Press SOURCE until you see iPod displayed.
2 To perform fast forward or reverse,
push and hold Multi-Control left or right.
58
En
All manuals and user guides at all-guides.com
3 4 5
2
3 To skip back or forward to another
track, push Multi-Control left or right.
Pushing Multi-Control right skips to the start
of the next track. Pushing Multi-Control left
once skips to the start of the current track.
Pushing again will skip to the previous
track.

Selecting a playlist

You can select a playlist from your iPod play-
list.
% Push Multi-Control up or down to select
a playlist.
# Playlist name is displayed for four seconds.
# If no songs have been stored in playlist, STOP
is displayed and playback stops.
Displaying text
information on iPod
Text information recorded on the iPod can be
displayed.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play time : song title
 : album titleDAB information (DAB in-
formation and play time)
# If the characters recorded on the iPod are not
compatible with this unit, those characters will
not be displayed.
Note
When Ever Scroll is set to ON at the initial setting,
text information scrolls continuously in the dis-
play. If you want to display the first 14 characters
of text information temporarily and scroll from
the beginning, press and hold DISPLAY. Refer to
Switching the Ever Scroll on page 82.
:artist name