Initial Settings; Adjusting Initial Settings; Setting The Date; Setting The Clock - Pioneer DEH-P70BT Manual De Instrucciones

Section
15

Initial Settings

Adjusting initial settings

Initial settings lets you perform initial setup of
different settings for this unit.
1 Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press Multi-Control and hold until the
calendar appears in the display.
3 Turn Multi-Control to select one of the
initial settings.
Turn Multi-Control clockwise to switch be-
tween the functions in the following order:
Calendar (calendar)Clock (clock)
Off clock (off clock)FM step (FM tuning
step)Auto PI seek (auto PI seek)
Warning tone (warning tone)AUX (aux-
iliary input)Dimmer (dimmer)Brightness
(brightness)SW control (rear output and
subwoofer controller)Mute (telephone mut-
ing/attenuation)Demonstration (feature
demo)Reverse mode (reverse mode)
Ever-scroll (ever scroll)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
78
En
All manuals and user guides at all-guides.com
1

Setting the date

The calender display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1 Use Multi-Control to select Calendar.
Calendar appears in the display.
2 Push Multi-Control left or right to select
the segment of the calendar display you
wish to set.
Pushing Multi-Control left or right will select
one segment of the calendar display:
DayMonthYear
As you select segments of the calendar dis-
play the segment selected will blink.
3 Push Multi-Control up or down to set
the date.
Pushing Multi-Control up will increase the
selected day, month or year. Pushing
Multi-Control down will decrease the se-
lected day, month or year.

Setting the clock

Use these instructions to set the clock.
1 Use Multi-Control to select Clock.
Clock appears in the display.
2 Push Multi-Control left or right to select
the segment of the clock display you wish
to set.
Pushing Multi-Control left or right will select
one segment of the clock display:
HourMinute