Adjusting Equalizer Curves; Fine-Adjusting Equalizer Curve; Adjusting Bass And Treble - Pioneer DEH-P70BT Manual De Instrucciones

Section
14 Audio Adjustments

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in Custom.
1 Use Multi-Control to select EQ.
EQ appears in the display.
2 Push Multi-Control left or right to select
the equalizer band to adjust.
Each pushing Multi-Control left or right se-
lects equalizer bands in the following order:
Low (low)Mid (mid)High (high)
3 Push Multi-Control up or down to ad-
just the level of the equalizer band.
Each pushing Multi-Control up or down in-
creases or decreases the level of the equaliza-
tion band.
+6  6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.
Note
If you make adjustments, Custom curve is up-
dated.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (Low/Mid/High).
Level (dB)
Center frequency
74
En
All manuals and user guides at all-guides.com
Q=2W
Q=2N
Frequency (Hz)
1 Use Multi-Control to select frequency
and the Q factor display.
Frequency and the Q factor (e.g., F 80 Q 1W)
appears in the display.
2 Push Multi-Control left or right to select
the desired frequency.
Each time Multi-Control is pushed left or
right, frequencies are selected in the following
order:
Low: 4080100160 (Hz)
Mid: 2005001k2k (Hz)
High: 3.15k8k10k12.5k (Hz)
3 Push Multi-Control up or down to select
the desired Q factor.
Each time Multi-Control is pushed up or
down, Q factor is selected in the following
order:
2N1N1W2W
Note
If you make adjustments, Custom curve is up-
dated.

Adjusting bass and treble

Use this function to adjust the bass and treble.
The ability to select the frequency as well as
the level gives you good control over the total
balance of audio.
! When EQ-EX is turned on and Custom is
selected as the equalizer curve, you can ad-
just bass and treble settings.
1 Use Multi-Control to select Bass (bass
and treble level adjustment).
Bass appears in the display.
# If the treble level has been previously ad-
justed, Treble will be displayed.