Roborock S6 MaxV Manual De Usuario página 23

Installation
Using the Robot
⑤
Install the Mop Cloth Bracket
Slide the bracket along the back of the water tank. A click indicates that
it is locked in place.
Note:
The mop cloth should be cleaned after 60 minutes of mopping to ensure water flow and cleaning
quality.
7. Adjust the water flow
Use the mobile app to adjust water flow as required.
Low Medium
WaterLevel Water Level
8. Start cleaning.
Charging is complete when the power indicator light changes from
breathing to a steady white light. Press the
to start cleaning.
High
Water Level
button or use the app
9. Remove the Mop Cloth Bracket
When the robot returns to the Charging Dock after cleaning, press the
latches on both sides, and slide the Mop Cloth Bracket backwards to
remove it.
Note:
・
After mopping, remove the Mop Cloth Bracket, pour out residual water from the water tank, and
clean the mop cloth to avoid mold and odor.
・
Remove the Mop Cloth Bracket when not mopping.
10. Remove the Mop Cloth Bracket from the water tank
Press the two side latches inwards and slide the Mop Cloth Bracket
backwards as shown to remove it from the water tank.
22