Operating Instructions; Safety Instructions; Safety Instructions - Porsche Wall Charger Connect Manual De Funcionamiento E Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions

Safety Instructions

Electric shock, short
DANGER
circuit, fire, explosion
Use of a damaged or faulty charger, incorrect
electrical installation, incorrect use of the charger or
failure to observe the safety instructions can cause
short circuits, electric shocks, explosions, fires or
burns.
e Only use accessories, such as the vehicle cable,
that have been approved and supplied by
Porsche.
e Do not use a damaged and/or soiled charger.
Check the cable and plug connection for damage
and soiling before use.
e Only connect the charger to properly installed and
fault-free electrical installations.
e Do not use extension cables, cable reels, multiple
sockets or (travel) adapters.
e Do not modify or repair any of the electrical
components.
e Only get experts to correct faults and carry out
repairs on the charger.
Electric shock, fire
DANGER
The incorrect electrical installation of the charger can
cause electric shock or fire when the high-voltage
battery is charged using the vehicle charge port.
e Installation on the power grid and initial operation
of the charger may only be carried out by an
electrically skilled person. The electrically skilled
person is fully responsible for compliance with
the relevant standards and regulations. Porsche
recommends that you use a certified Porsche
service partner.
e The charger should only be operated in properly
earthed power supply systems. Operation in non-
earthed systems (e.g. IT networks) is not
possible.
e The cross-section of the power cable for the
electrical socket is defined in accordance with the
wire length and the locally applicable regulations
and standards.
e To ensure uninterrupted charging, we
recommend that you only use electrical
terminations that are connected via a separately
fused electric circuit for charging.
e The charger is designed for use in the private and
semi-public sector, e.g. on private property or in
company parking lots.
e Unauthorized persons (e.g. playing children) or
animals must not have access to the charger or
the vehicle during unsupervised charging.
e Please read the safety instructions in the
Installation Instructions and the Owner's Manual.
Operating Instructions
Electric shock, fire
DANGER
Incorrect handling of the plug contacts can lead to
electric shock or fire.
e Do not touch the contacts on the vehicle charge
port and charger.
e Do not insert any objects into the vehicle charge
port or charger.
e Protect plug connections against moisture, water
and other liquids.
Flammable or explosive
WARNING
vapors
Components of the charger can cause sparks and
ignite flammable or explosive vapors.
e To reduce the risk of explosion, particularly in
garages, make sure that the control unit is
located at least 19.7 in. (50 cm) above the floor
during charging.
e Do not install the charger in potentially explosive
areas.
Risk of fatal injury as a
DANGER
result of modifications
Conversion of the charger, e.g. from mode 3 (Wallbox
mode) to mobile mode 2, can cause short circuits,
electric shocks, explosions, fires or burns. Risk of
fatal injury!
e Once the charger has been installed for mode 3
(Wallbox mode) by specialist personnel, the
charging equipment must not be removed or
operated in mobile mode.
If the charger is removed and operated in mobile
mode, you will be solely responsible for all
resulting consequences.
US
FC
ESM
3

Publicidad

Tabla de contenido
loading

Tabla de contenido