Qualification Of Personnel; Qualification Of Personnel; Grounding Instructions; Intended Purpose - Porsche Wall Charger Connect Manual De Funcionamiento E Instrucciones De Instalación

Qualification of Personnel

The electrical installation may only be performed by
persons with appropriate electrical/electronic
knowledge and experience (electrician). These
persons must be able to provide proof of the required
specialist knowledge for the installation of electrical
systems and their components by having passed an
examination. Improper installation endangers your
own life and the life of the electrical system users.
With an improper installation, you risk serious
property damage, e.g. due to fire. In the case of
personal injury and property damage, you are
personally liable, depending on the legal situation.
Requirements for qualified electricians:
– Ability to choose the appropriate tool, test
equipment and personal protective gear,
if necessary
– Ability to evaluate the test results
– Ability to choose the electrical installation
material required for ensuring the switch-off
conditions
– Knowledge of the NEMA/IP protection classes
– Knowledge of how to install the electrical
installation material
– Knowledge of the type of supply network
(TN system, IT system and TT system) and the
related connection requirements (grounding
without a special grounding conductor,
protective grounding, required additional
measures, etc.)
– Knowledge of the general and special safety and
accident prevention regulations as well as fire
protection measures
– Knowledge of the electrical/electronic
regulations and national regulations

Grounding Instructions

Charger must be grounded.
If it should malfunction or break down, grounding
provides a path of least resistance for electric current
to reduce the risk of electric shock.
This product must be connected to a grounded,
metal, permanent wiring system, or an equipment-
grounding conductor must be run with the circuit
conductors and connected to the equipment
grounding terminal or lead on the product.

Intended Purpose

Charger with integrated control and protection for
mode 3 charging for vehicles with high-voltage
battery that meet the generally applicable standards
and directives for electric vehicles.

Key to Pictograms

Depending on the country, various pictograms may
be attached to the charger.
The charger should not be
operated at altitudes of more than
13,123 ft. (4,000 m) above sea
level.
Dispose of the charger in
compliance with all applicable
disposal regulations.
Risk of electric shock due to
improper use.
Operating Instructions
Observe the operating instructions
provided, particularly the warnings
and safety instructions.
The surface of the charger can
become very hot.
Only operate the charger
in single-phase networks.
PROTECTIVE GROUNDING
TERMINAL:
A terminal which must be
connected to ground prior
to making any other connections
to the equipment.
Indicates the type 1 plug with
a voltage range of ≤ 250 VAC.
Indicates the type 2 plug with
a voltage range of ≤ 480 VAC.
US
FC
ESM
5