Basic playback
Saving channel presets
This receiver can memorize up to 63 channels,
stored in seven banks, or classes (A to G) of 9
channels each.
1
Select the channel you want to memorize.
See Selecting channels and browsing by genre
on page 54.
2
Press T.EDIT.
The display shows a blinking memory class.
3
Press CLASS to select one of the seven
classes, then press / to select the channel
preset you want.
You can also use the number buttons to select
a preset.
4
Press ENTER.
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the SIRIUS channel.
Tip
• You can also press MEMORY during
reception display to save the information of
up to five songs. See Using the SIRIUS
Menu below to recall this information.
Listening to channel presets
1
Press CLASS to select the class in which
the channel is stored.
Press repeatedly to cycle through classes A to G.
Press / to select the channel preset
2
you want.
• You can also use the number buttons on the
remote control to recall the channel preset.
Note
1 You can reset the Channel presets, Memory, Channel Skip/Add, Parental Lock and Password settings in Resetting the
system on page 75.
Using the SIRIUS Menu
The SIRIUS Menu provides additional SIRIUS
Radio features.
1
Press TOP MENU.
Use / to select a menu item, then
2
press ENTER.
Choose from the following menu items:
• Channel Skip/Add – Use / and ENTER
to select channels you would like to
remove/restore from/to the channel guide.
• Parental Lock – Use / and ENTER to
select channels you would like to place
under parental lock. Channels put under
parental lock are not displayed in the
Channel Guide, but may be accessed by
directly inputting their channel number
and providing the parental lock password.
• Antenna Aiming – Check the strength of
satellite and terrestrial reception.
• Memory Recall – Use / to browse your
saved song information (see Tip above).
• Password Set – Set the parental lock
password.
3
When you're finished press TOP MENU to
1
return to the reception display.
05
55
En