General Safety Practices; Basic Operation Practices - Skymsen LAR-15LMB Manual De Instrucciones

These substances attack the stainless steel due to the CHLORINE on its composition,
causing corrosion spots (pitting).
Even detergents used in domestic cleaning must not remain in contact with the stainless
steel longer than the necessary, being mandatory to remove it with plain water and then
dry the surface completely.
Use of abrasives:
Sponges or steel wools and carbon steel brushes, besides scratching the surface
and compromising the stainless steel protection, leave particles that rust and react
contaminating the stainless steel. That is why such products must not be used for cleaning
and sanitization. Scrapings made with sharp instruments or similar must also be avoided.
Main substances that cause stainless steel corrosion:
Dust, grease, acid solutions such as vinegar, fruit juices, etc., saltern solutions (brine),
blood, detergents (except for the neutral ones), common steel particles, residue of sponges
or common steel wool, and also other abrasives.

4. General Safety Practices

In case any item of the GENERAL SAFETY PRACTICES does not apply to your
The following safety instructions have been elaborated to guide and instruct the users of
this equipment.
The machine has to be delivered only in perfect conditions of use by the Distributor to the
user. The user shall operate the machine only after being well acquainted with the safety
procedures described in the present manual. READ THIS MANUAL WITH ATTENTION.

4.1 Basic Operation Practices

4.1.1 Dangers
Some areas of this electric device have parts that are connected to high voltage. These
parts when touched may cause a severe electrical shock or even be lethal.
Never touch manual commands such as switches, buttons, turning keys and knobs with
your hands wearing wet clothes and/or wet shoes. By not following these instructions,
the operator could be exposed to the risk of severe electrical shock or even to a lethal
situation.
4.1.2 Warnings
* The operator has to be well familiar with the location of the ON/OFF Switch. This will
assure that this Switch is easy to be reached when necessary.
* Before any kind of maintenance or service on the equipment, remove plug from the
socket.
12
IMPORTANT
equipment, please ignore it.