Pentair INTELLIBRITE 5G LIGHT Guía De Usuario página 25

3. Using a #3 Phillips head screwdriver, loosen the CLAMP SCREW and
remove Uni-Tension Wire Clamp from the face ring.
4. Remove the face ring and Uni-Tension Wire Clamp from the light
housing. Discard the Uni-Tension Wire Clamp. Save the face ring for
reinstallation.
Note: A 120 VAC to 12
VAC external transformer
is required for the 12 VAC
model IntelliBrite
Light. See page 1 for more
information.
Note: The IntelliBrite Spa
Light fixture is a sealed light
assembly with no replaceable
circuit board assembly. Only the
lens, gasket and face ring can
be removed from the sealed light
assembly for replacement. See
page 24 for replacement kit part
numbers.
5. With the light assembly resting on its base on the deck, carefully pry
off the gasket to release the lens. Discard the gasket. A NEW LENS
GASKET AND UNI-TENSION WIRE CLAMP MUST BE INSTALLED
EACH TIME THE SPA LIGHT IS REASSEMBLED
Spa light assembly
® Spa
Discard old
gasket
Lens
(keep
lens)
INTELLIBRITE
Spa light fixture with lens, gasket
and face ring attached
Phillips screw
5G Pool and Spa Lights Installation and User's Guide
®
Loosen the
Phillips screw
to remove
UNI-TENSION
WIRE CLAMP
from the face
ring.
Face ring and uni-tension
wire clamp
21