General Safety; Safety In The Preparation - Nogueira FTN-1600 Manual De Instrucciones

2.1- General safety

ƒ Read the Instructions Manual before turning
the machine on. Be aware of and observe
all recommendations for use and safety
during operation. Pass the information to the
other users and keep the Manual in a place
accessible to all users and maintenance staff.
ƒ The stickers found on the machine provide
a series of important indications: respecting
the signals is a way to safeguard your own
safety. Replace illegible or damaged stickers
immediately.
ƒ Keep a first aid kit in an easily accessible place.
ƒ Observe and pay attention to all safety
recommendations in this manual. Lack of
attention during the operation might result
in a serious accident.

2.2- Safety in the preparation

ƒ When coupling the machine to the tractor, choose a flat location, facilitating
the procedure and subsequent uncoupling. Make sure that the parking brake
of the tractor has been engaged and that the machine is stationary.
ƒ Do not stand between machine and tractor during coupling. There is a risk
of accident with impact injuries and crushing in the event of an involuntary
movement of the machine or the tractor.
ƒ After coupling to the tractor, make sure that the machine is correctly engaged
and the coupling pins properly locked.
ƒ Carefully note that the cardan shaft is properly locked in the machine shaft
and in the power take-off of the tractor.
ƒ Secure the ends of the cardan's safety guards at fixed points on the tractor
and implement by means of the specific chains for this purpose so that they
remain static without turning. Never use the cardan without safety guards.
Instructions Manual
2. Safety
9