4.7.7- Lifting the outlet chute
Remove the counter pins (G) and release
1.
the two arms (F);
Secure the arms (F) to the chute's pivot
2.
pin (E);
Place the two counter pins on the pin (E);
3.
Press and hold the 'LIFT THE CHUTE' button
4.
on the Joystick (see the figure opposite).
Move the tractor hydraulic control lever.
5.
NOTE!
The side to which the lever is moved
(forward or backward) determines
whether the chute will lift or lower.
Take a test and observe.
Secure the tensioner (C) to the chute with
6.
the pin (D);
Finally, tighten the jam nut (B).
7.
G
Instructions Manual
4. Preparation
F
E
F
LIFT
THE CHUTE
D
JOYSTICK
C
B
57