Fluidmaster K-400H-5002 Guía De Instalación Rápida página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STEP 9: FLUSH THE TOILET
A: FLUSH THE TOILET, CHECK BOWL WATER LEVEL.
Repeat Steps 8C and 8D until water level in bowl matches
the line when the fill valve shuts off.
If you're satisfied with the flush, YOU'RE DONE!
YOU DID IT!
We knew you could!
Share your success story
with friends and family!
Still not working exactly right?
See the next page for Troubleshooting.
12
#FixedMyToilet
#Fluidmaster
TROUBLESHOOTING
IF THE FILL VALVE:
• DOES NOT TURN ON
• WON'T TURN OFF
• WON'T REFILL TANK
REMOVE CAP AND CHECK FOR DEBRIS
A:
Turn off water supply.
B:
Flush toilet.
C:
With right hand push float up, grip and
hold shaft under float.
D:
With left hand twist cap and lever arm
counterclockwise to unlock cap. Let cap
hang on float cup.
E:
Hold empty cup upside down over un-
capped valve to prevent splashing.
F:
Turn water supply on and off a few times.
G:
Turn water supply off.
H:
Replace valve cap.
• Place cap assembly on top of
gray valve body by aligning cap
arm and adjustment rod next to
refill tube.
• Press down on top cap while
rotating top & arm clockwise
to locked position.
See Our Troubleshooting
HOW-TO VIDEO
VIDE O
http://bit.ly/2yAdZn7
TURN
COUNTER-
CLOCKWISE
13

Publicidad

Tabla de contenido
loading

Tabla de contenido