2.1 SETTING THE TEMPERATURE
When the oven is ON, by pressing the INCREASE
possible to set a temperature value (temperature range adjustable from 30°C to 260°C).
In case of first switching on (first switching on means whenever you put the oven ON by pressing the
ON/OFF
button) the TEMPERATURE/PROGRAMMES display (10) (TEMPERATURE icon
lit) shows flashing the (30° C) value.
In case a cooking cycle has just finished, the value previously set appears flashing on the display.
During the modifications, the visualisation of the values in the display is flashing.
After a timeout of five seconds, or by pressing the TIME button
return to the display of the actual temperature in the cooking chamber (flashing TEMPERATURE icon
After having confirmed the data, the visualisation of the values is steadily displayed.
Pressing the ON/OFF button
2.2 SETTING THE COOKING TIME
To set a cooking time, press the TIME button
red)shows the value END. Time range adjustable from 00h01mins - to 15h59mins.
Pressing the INCREASE
When going under a minute END is displayed and subsequently INF.
END is used in the programmes mode with steps to disable the step.
INF means that you have selected an infinite time, which means that the oven will always work until it is
stopped by pressing the START/STOP button
During the modifications, the visualisation of the values in the display is flashing.
The confirmation of the value is done by pressing the TIME
Once the data has been confirmed, the visualisation of the values on the display is steady.
CLOCK icon
steadily lit up in green.
Pressing the ON/OFF button
puts the card in OFF and the new settings are not saved.
the TIME display (9) (CLOCK icon
or DECREASE
.
puts the card in OFF and the new settings are not saved.
28
or DECREASE
, the set value is confirmed and we
buttons allows you to set a time value.
button, or after a 5-minute timeout.
buttons it is immediately
steadily
steadily lit up in
).