Faucet Installation - Kohler Vinnata K-690 Guia De Instalacion

Faucet
Escutcheon
For Three-Hole
Sinks
Undercover

1. Faucet Installation

For One-Hole Sinks
- Use the appropriate gasket (provided).
For Three-Hole Sinks
- Apply plumbers putty or other sealant to the bottom edges of the
undercover according to the putty manufacturer's instructions.
- Place the undercover over the sink holes, align and press into place.
- Remove any excess putty.
- Place escutcheon over the undercover.
For All Sinks
- Partially thread two screws into the threaded ring until they just
protrude from the backside of the threaded ring.
- Fit the faucet through the hole in the sink. Position the faucet so the
handle faces the desired direction. The recommended handle
position is to the user's right.
- Slide the fiber washer, metal washer and ring onto the threaded
shank until the ring is about 1/4" (6mm) away from the sink bottom.
- Turn the ring as needed so the screws are to the front and back.
Securely tighten the screws.
Kohler Co.
Faucet
Gasket For
One-Hole Sinks
Escutcheon
for One-Hole
Sinks
Sink
Fiber Washer
Metal Washer
Gasket
Screw
Ring
3
Escutcheon for
Three-Hole
Sinks
Undercover
C
1013943-2-